Myron L Products

contactshipcallwe ship worldwide

RO Meters

RO Meters

Reverse Osmosis Meters for Measuring Total Dissolved Solids

The choice of professionals for years, this compact instrument has been designed specifically to demonstrate and test Point of Use (POU) reverse osmosis or distillation systems. By measuring electrical conductivity, it will quickly determine the parts per million/Total Dissolved Solids (ppm/TDS) of any drinking water.

With a single "before and after" test, this handy device effectively demonstrates how your RO or distillation system eliminates harmful dissolved solids. It will also service test systems, including membrane evaluation programs.

Automatic Temperature Compensation: Why It Is Important

The graph below illustrates a TDS reading of a 500 ppm water sample tested with a non-temperature compensated conductivity meter. The same water sample appears to have a higher level of TDS when heated (and lower TDS when chilled). Actually, only conductivity readings change with temperature. TDS does not change.

Many instruments ignore the importance of temperature. Others require a separate thermometer for testing sample temperature, then manual adjustment of the meter. All Myron L® instruments, however, feature fast and precise Automatic Temperature Compensation. The result: a more accurate, useful instrument.

How Conductivity Measures ppm/TDS

Total Dissolved Solids (TDS) conduct electricity. This conductivity allows measurement of the concentration of these salts directly in parts per million (ppm). However, the salts' composition in waters can vary significantly by location. Since various salts pass current differently, it was necessary to determine an "average" ppm/ conductivity relationship. The Myron L® Company established the "442" Standard over 55 years ago. It remains the world's most widely accepted standard of its kind.

f You also Test pH:

Myron L® offers instruments that check both TDS and pH, and are widely used throughout the RO industry.

  • pH sensor is built-in for maximum protection
  • Automatic temperature compensation
  • Full calibration capability
  • Many models available

Also see our RO-CHECK™ POU TDS Monitor

AG6/PH Features:

  • Checks soil pH and salinity
  • Checks water pH and salinity
  • Checks correct fertilizer concentration
  • Checks boiler water conductivity
  • Automatic temperature compensation means no thermometers or adjustments
  • Only small amount of soil needed for tests

RO METERS™ Features:

  • Instant and accurate TDS tests
  • Electronic Internal Standard for easy field calibration
  • Fast Auto Temperature Compensation
  • Rugged design for years of trouble-free testing
  • Simple to use

RO Meters™ Technical Specifications:

RO-1 Range: 0-1250 ppm (0-250 blue, 250-500 orange, 500-1250 red)
RO-1NC Range: 0-1250 ppm (no color band)
Accuracy: ±2% of full scale
Repeatability: ±1%
Temperature Compensation: Automatic (to 25°C/77°F) for samples between 10-71°C/50-160°F
Electrodes (built-in): Never need replatinizing or replacement
Cell Cup: Chip and crack resistant polyethylene
Recalibration: Internal electronic standard quickly verifies on-site accuracy
Circuitry: Solid-state, sealed against moisture
Power: One 9V battery supplied; Battery Life: >2000 tests/1 year
Dimensions: 3.4 W x 4.5 D x 4.0 H in./ 86 W x 114 D x 102 H mm
Weight: 1 lb./0,45 kg

RO Meters™ Applications:

  • Reverse Osmosis
  • Drinking Water
  • Distillation Systems

RO Meters™ Accessories, Replacement items and Solutions:

  • Standard Solutions are used to periodically recalibrate instruments for greatest accuracy. 442-1000 (1000 ppm/TDS) is the type used in MyronL factory calibrations.
  • Model: 442-1000 (Specify quart, gallon or 2 oz.)instructions included.
  • Porta-Pak Carrying Case: For use with all Myron L® DS/pDS portable instruments. Foam lined and molded of sturdy ABS plastic. Model: PTP


Click to order Standard Solutions and Buffers

LIMITED WARRANTY
Myron L RO instruments have a Two (2) Year Limited Warranty. If an instrument fails to function normally, return it to the factory prepaid. If, in the opinion of the factory, failure was due to materials or workmanship, repair or replacement will be made without charge. A reasonable service charge will be made for diagnosis or repairs due to normal wear, abuse, or tampering. Warranty is limited to the repair or replacement of the Myron L instrument only. The Myron L® Company assumes no other responsibility or liability.

  • Models: RO-1, RO-1NC, PTP, MC & MCATF

Please Choose:
Check the box for the product, then add to the cart.

DS Conductivity/TDS Meters






DS and pDS Accessories





NIST Certifications






Add to Cart:

Customers who bought this product also purchased...

Copyright © 2024 GWJ Co. All rights reserved.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies.
**Prices, images and specifications subject to change without notice.**

PIA Member    D & B Verified

For your convenience, we accept these credit cards:
Credit Card Logos