Nitrate/Temperature
Benefits
- Reliable Repeatable Results
- Accurate
- Affordable
- Easy to Use
- Rugged Design
- Ensure Product Quality
- Reduce Waste
- Protect the Environment
High Performance Features
- Nitrate Concentration (ppm N or ppm NO3–) or mV
- 1 and 2 Point Calibration Options
- Proprietary ISE Sensor Design
- Built-in Double Junction Reference Electrode
- Compatible with EPA Approved Standard Method 4500-NO3–D
- Live or Hold Mode - User Selectable
- Auto-Off Feature – User Adjustable
- Easy to Use - One Button Control
- Rugged Design with Aircraft Aluminum Body
- Durable, Epoxy Encapsulated Electronics
- Waterproof
- Powered by One N Type Battery (Included)
PT6 Comes With:
- PT6 Pocket Tester Pen - Battery Installed
- User Replaceable Nitrate Sensor – Installed
- 100 ppm NO3–N Standard Solution – 2 oz.
- Ionic Strength Adjuster (ISA) – 2 oz.
- Graduated Cylinder with Cap – 2 ea.
- 100 μL Pipette – with Tip
- Protective Cap
- Pocket Clip
- Lanyard
- PT6 Operation Manual
PT6 MEASUREMENT MODES
| Mode |
Action |
| Hold |
Displays real-time readings until the LED turns solid ON, then displays final readings. |
| Live |
Displays real-time readings continuously for up to 5 minutes. |
PT6 PARAMETER MODES
| Mode |
Parameter Measured |
| N |
Display alternates between Nitrate as Nitrogen (NO3–N), and Temperature |
| NO3 |
Display alternates between Nitrate (NO3–), and Temperature |
| mV |
Display alternates between millivolt (mV), and Temperature |
SPECIFICATIONS
| |
Nitrate as Nitrogen NO3–N |
Nitrate NO3– |
Temperature |
| Ranges |
1-1400 ppm |
4.4-6200 ppm |
0 - 71°C / 32 - 160°F |
| Accuracy¹ |
±10% of the reading |
±10% of the reading |
± 0.1°C |
| Resolution |
0.1 ppm |
0.1 ppm |
0.1°C/F |
| pH Range |
3-11 pH |
| Time to Reading Stabilization |
10 - 180 seconds |
| Power Consumption |
Active Mode: 33 - 140 mA |
| Physical Dimensions |
17.15 cm L x 1.59 cm D or 6.75 in. L x .625 in. D |
| Weight |
54 g or 1.94 oz. |
| Case Material |
Anodized Aircraft Aluminum with Protective Coating |
| Battery Type |
N type, Alkaline 1.5 V |
| Calibration Standard Solutions |
1, 10, 100, or 1000 ppm NO3–N |
| Operating / Storage Temperature |
0-40°C / 32-104°F² |
| Enclosure Ratings |
IP67 and NEMA 6 |
| EN61236-1: 2006 - Annex A: 2008; Electrostatic discharge to case of instrument may cause PT6 to spontaneously power ON. In this case, the PT6 will power OFF after several seconds. |
WARNING! These products can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov. |
¹ Accuracy of measuring standard solutions after Temperature Controlled, 2-Point Calibration with one order of concentration difference.
² For extended life of the sensor, store the pen in a cool location (5-25°C)
Click to order Standard Solutions and Buffers
WARRANTY
The PT6, excluding the Sensor and Battery, has a one (1) year limited warranty.
The Nitrate sensor has a six (6) month limited warranty.
Includes battery installed, protective cap, 100 ppm solution (2 oz.), ISA (2 oz.), 2 graduated cylinders with caps, pipette with tip, pocket clip, lanyard, operation manual
Click for Operation Manuals / Instructions
Myron L® Ultrapen™ Series units have probes that can freeze and break and must ship 2nd Day Air with a heat pack.
Ignoring this requirement voids the warranty.
- Models: PT6, PTBT6, BATT11768, BATT11768-B3, RPT6 & PTSC1
